Cub IV Hand-Wired Series

Screen Shot 2019-02-20 at 11.45.28 PM.png

Cub IV Combo

Screen Shot 2019-02-20 at 11.44.33 PM.png

Cub IV Head

 

Made to Order 2-4 Month Lead Time

  • 15-Watt (2-EL84), 30-Watt (4-EL84), or 40-Watt (2-EL34)

  • Cathode biased

  • Patented K Master® circuit

  • Foot switchable EF86 or 12AX7 pre-amp

  • Tube Reverb (optional)

  • Effects loop

  • Foot switchable boost circuit - (Foot Switch Included)

Bad Cat raises the bar yet again and offers an update on the classic Cub circuit. The all new Cub IV features a switchable A or B valve in the first position pre-amp. You can select between 12AX7 or EF86 pre-amp tube by a toggle or foot switch. This new feature is drastically different sonically in gain structure, and character from any previous Cub models.

We have added a selectable gain fat boost on the bass and treble tone stack to run hotter, or choose to stay in standard Cub mode. This feature can be used as a classic gain boost. Combine this with the EF86 pre-amp and now you’re in territory previously unavailable from older Bad Cat Cub models.

All new for the Cub IV we have added a 5 way Depth control which unlike the previous Cub models , is active and live at all times. You can select the bypass capacitor and shape the over-all low frequencies. This is especially useful when playing through a bridge position pickup on a tele or strat style guitar. You can dial in amazing full and tight lows and create sounds unavailable until now.

A two button foot switch is included. Button one controls the selection of the EF86 or 12AX7 pre-amp. The second button offers the ability to punch in the added gain on the tone stack. With the foot switch you can go from chiming clean to crunch, and all the way to the wide open.

Patented K Master®

Gain up the power amp section while leaving the pre-amp sparkling clean? Yes. Imagine getting a full 15 watts of clean headroom out of a 15 watt amp, or a full 30 out of a 30. Turn down the master volume to bedroom low all while maintaining your tone intact. Not only is this possible it’s also useful for guitar players.

Power amp gain is different than pre-amp gain. It feels, sounds and even looks different. Master volume has always been misnamed. It should have been called master attenuation. Until now master volumes were unable to do anything, but attenuate. The drive to the power section was always dependent on the drive coming from the pre-amp.

Now Bad Cat has figured out a way to separate the pre-amp from the power amp gain, and calling it the K Master®. Before this you couldn't drive the power amp hard without pushing the pre-amp into saturation. The K Master® patent pending technology has allowed us to re-invent the concept of the master volume. Bad Cat is now offering the K Master® in the Cub III Series.

Electronics

Power: 15-Watt (2-EL84), 30-Watt (4-EL84), or 40-Watt (2-EL34)
Channels: 1

Speaker Description

Proprietary Bad Cat Celestion Speaker
Impedance: 4, 8, 16 ohms

Hardware

Available Configuration: Head Shell, 1x12 Combo
Cabinet Material: 13' Ply Baltic Birch

Tubes

Power Tubes: 2 EL84, 4 EL84, or 2 EL34
Pre-Amp Channel 1: 12AX7 OR EF86
Pre-Amp Channel 2: N/A
Reverb: 2 12AX7
Rectifier Tube: GZ34

Operating Manuals & Tube Charts
Cub IV15R Tube Chart
Cub IV30R Tube Chart
Cub IV40R Tube Chart

Cub Series Videos